+86-15962378058    info@topsindustry.com
Share to:

Whole Tyre Bead Wire Removing Machine

This Whole Tyre Bead Wire Removing Machine liberates the bead wire from the whole tyre. It is a very useful and important machine in waste tyre recycling plant. Moreover,  The bead wire made from this machine is very clean and can be sold at high value. 
Availability:
Quantity:
  • TPS-WDBD
  • TopsRecycling
Overview

This Whole Tyre Bead Wire Removing Machine liberates the bead wire from the whole tyre. It is a very useful and important machine in waste tyre recycling plant. When the bead wire is taken out, the power load for the shredder will be greatly reduced, and the lifespan of shredder blades will be prolonged substantially. 

Moreover,  The bead wire made from this machine is very clean and can be sold at high value.

Working Process

The whole waste tyre bead wire removing process consists of the below steps:

        A. Wheel the waste tyre on to the elevation platform

        B. Lift up the waste tyre and transfer the tyre on the holding (feeding) beam

        C. Start the debeading rolls and feed the waste tyre bead into the rolls

        D. The debeading work starts, the bead wire will be liberated within one or two circles.

        E. Unload the waste tyre to the ground and take out the bead wires

        F. Turn the tyre to another side and repeat the above whole process for removing the other side of bead wire. 


Technical data of this waste tire bead wire removing machine


No. Items Description
1 Motor Power
22 kW
2 Motor speed
960 RPM (6 Pole)
3 Hydraulic motor power 1.5 kW
4 Working efficiency 30 to 40 tyres per hour
5 Figure dimension 1800mm×1500mm×1800mm
6 Gross weight About 4600 Kgs
Advantages of whole tyre bead wire removing machine
1. High efficiency in production capacity. It can remove bead wire for 30 to 40 waste tyres per hour
2. User friendly and maintenance friendly.  

3. Low power consumtion. Total installed power is 23.5 kW only. The actual power consumption is only about 20~30% of the installed power. 

4. Very low running cost and maintenance cost

5. The bead wire made on this machine is very clean, and still keep in circle shape, it can be sold at high value. 

Waste Tyre Bead Wire

Bead wire made by above bead wire removing machine, it is clean and in round shape that can be sold at high price

Bead wire puller

Bead wire made by puller, it is deformed, and there is alway a small rubber block stick on the wire. So, it can be sold as scrap at low value


Reference Pixtures


Waste tyre debeading machine

Output 1 --- Debeaded Tyres


This debeaded tyres can be fed to shredder directly, which can reduce the motor loading of the shredder greatly, and the lifespan of the shredder blade will be increased substantially. 



Waste Tyre Debeading Machine

Waste Tyre Bead Wire Removing Machine

This is a very useful machine in waste tyre recycling plant, it saves a lot of cost for the waste tyre recycler and create high extra value by selling high quality bead wires. 

Tyre Bead Wire

Output 2 --- Clean Waste Tyre Bead Wire

This waste tyre bead wire is very clean, and have many applications. Therefore, it is a good seller with high selling value. 



FAQ

Q:Click here to edit your content.

A:Click here to edit your content.

Q:Click here to edit your content.

A:Click here to edit your content.


Previous: 
Next: 
Leave a Message
Contact Us